• You are currently here:
• Home >
• Shower Enclosures >
• Quadrant Shower Enclosures >
• Capua Sliding Door Quadrant Shower Enclosure

 

800 or 900mm Capua Minimalist Sliding Quadrant Shower Door

The Capua is a stunning minimalist design shower enclosure with 8mm thick glass and external roller wheels which slide along the track for an undeniable feel of quality.

The 1900mm high doors are hung from the top track with the secondary rollers on the outside of the enclosure holding the door firmly in place and allowing it to effortlessly glide.

The solid rectangular door handle is a double handle allowing you to also slide the enclosure from the inside.

Measurements of the door are 1900mm high by 800 or 900mm for the quadrant

The door is pictured mounted straight onto a tray but it is also suitable for mounting onto a wetroom floor.

Optional Shower Tray

Traditionally shower trays have been stone resin. These are bulky and bulbous and difficult to install as they are heavy. The alternate has been acrylic trays but these are notriously flimsy but easy to maintain as they have easy clean, non slip surfaces. This tray however is the best of both worlds. It is a low profile 45mm tray with approximately 35mm of the tray being stone resin for durability and strength and the top 10mm of the tray being non slip, easy clean acrylic.

This tray is ideal for use with frameless enclosures such as the capua and allows a watertight seal by tiling to the outer rim. Maximum showering space can be achieved because the whole width of the tray can be used.

Additional if you require an easy plumb tray, where the tray is raised up to keep the plumbing and pipework above the floor, then this is available for an additional £66.

 

 

Want to leave a review about this product? Name Location: Subject Review Enter the following numbers here: Change Image